Supercritical CO2 ຄວາມຫນາແຫນ້ນ, ວົງຈອນ, ເຄື່ອງຈັກຄຸນສົມບັດ

● Supercritical CO2 extraction technology is the latest subject in modern chemical separation and it is an advanced separation technology rising in the world. The so-called supercritical fluid is the thermodynamic state liquid which is above the critical point and the critical point is the point at which the gas-liquid interface just disappears. The supercritical fluid has a very unique physical and chemical properties, its density close to the liquid, viscosity close to the gas.The big diffusion coefficient, low viscosity, big dielectric constant and other characteristics make its separation effect better, so it is a good solvent. Supercritical extraction, namely, under high pressure and appropriate temperature, solvent contact with the material in the extraction vessel, the solute diffuses into the solvent, and then in the separator change the operating conditions to separate out the dissolved substance in order to achieve separation purposes.

The supercritical units select the CO2 medium as the supercritical extraction agent, which makes it have the following characteristics:

● Wide operating range, easy to adjust;

● Good selectivity, and through controlling the pressure and temperature, targeted extraction of the required ingredients;

● Low operation temperature, the extraction is carried out at a temperature close to room temperature, which is particularly suitable for heat-sensitive components. The extraction process eliminates the possibility of oxidative and photoresponsive reactions, and the extract retains the natural flavor;

● Only one step from extraction to separation, the CO2 after extraction will not remain in the extracts;

● CO2 is non-toxic, tasteless, non-flammable and easy to get and reused;

● Fast extraction speed;

● In recent years, supercritical extraction technology has got rapid development home and abroad, has realized the industrialized production in hops, spices, herbs, oils, petrochemicals, food health, and other areas.

1. The air source part
● CO2 gas cylinders (provided by customer), the cylinder pressure generally remain at more than 5 mpa, CO2 purity of 99.99% or higher

2. Cooling part

● Refrigeration parts by enclosed refrigeration compressor, storage tank, cold box, temperature controller with spiral coil and tube valve parts, imported compressor.

● Cold box is equipped with refrigeration temperature automatic control system and can be arbitrarily set refrigeration required temperature, cold box into the tank, insulation, CO2 coil and stainless steel decorative layer.

● Storage tank: 10L/ 16 mpa for liquid CO2 storage.

3. Power supply part

● CO2 high-pressure plunger pump:one set

● Power 2.2 kw, maximum flow is 50L/h, maximum working pressure of 40 mpa.

● Carrying agent pump: the maximum flow 10L/h, maximum working pressure of 40 mpa.

4. Purifying filtration system

● 16 mpa design pressure, volume 1L, the quantity is 1 only, built-in silica gel or other used to filter material, have the effect of filtering, can be put into use in parallel.

5. The extraction kettle

● Volume is 5L, the highest working pressure of 40 mpa, maximum operating temperature 80 ℃, two extraction kettle can be used in parallel, with solid material inside the basket (1 in 1 case), material basket of split up and down, convenient discharging, used for extraction of solid material; The heating jacket and insulation kettle body, and is equipped with stainless steel decorative layer. Extraction kettle seal with special structure and special sealing material, structure for sealing, the higher the pressure, the better the self-styled, and fast to open, use for a long time do not need to replace the sealing ring.

6. Separate kettle

● Two sets of separate kettle to 2 liters, the highest working pressure are 20 mpa, entrance to be close to the bottom, intubation set heating jacket and insulation kettle in vitro, maximum separation temperature up to 80 ℃.

7. Preheater

● The highest working pressure of 40 mpa, the maximum operating temperature 80 ℃, preheater under constant temperature water bath, the water tank with insulation layer, and is equipped with stainless steel decorative layer. Preheater with constant temperature water bath as a whole, reduce the water hot water transmission, and make corresponding preheater with every body temperature more step convergence, more compact structure.

8. Thermodynamic cycle using corrosion and heat-resistant pipeline pump, number 3 only.

9. Flowmeter

● Metal tube flow meter with secondary instrument, it can display instantaneous flow, and cumulative flow can be shown, it is mainly used for measuring CO2 flow volume.

10. Heating control system

● The system is to use temperature controller to set the required temperature, the heat resistance temperature measurement, the feedback signal to the temperature controller, in order to achieve the purpose of temperature control. The extraction kettle, the separator adopts the temperature control of temperature controller.

11. All with vibration-proof pressure gauge pressure gauges.

12. Safety protection device

● The device is equipped with electrode point pressure gauge, over-voltage protection, when the pressure rose to the point of electrode pressure gauge set, the control system will automatically cut off the pump power supply, pump stop working, and make the pressure does not exceed the set pressure. In addition, the extraction kettle, separate kettle are equipped with safety valve, when pressure exceeds the pressure of the relief valve set, relief valve on the overflow, the pressure drop and the implementation of pressure protection.

13. Manual and automatic extraction part pressure feedback control

● The distinctive features of the device is in extraction parts both manual voltage regulator, and automatic pressure control section, the manual and automatic dissolve into an organic whole, make the pressure greatly improve the accuracy of setting control, control accuracy can reach 0.5%, the purity of the extracted components is higher.

ການບໍລິການທາງສ່ວນຫນ້າຂອງການຂາຍ

● ສອບຖາມ ແລະໃຫ້ຄໍາປຶກສາສະຫນັບສະຫນູນ.

● ສະຫນັບສະຫນູນການທົດສອບຕົວຢ່າງ.

● ເບິ່ງໂຮງງານຂອງພວກເຮົາ.

ບໍ​ລິ​ການ​ຫລັງ​ການ​ຂາຍ

● ການຝຶກອົບຮົມວິທີການຕິດຕັ້ງເຄື່ອງຈັກ, ການຝຶກອົບຮົມວິທີການນໍາໃຊ້ເຄື່ອງຈັກ.

● ວິສະວະກອນທີ່ໃຫ້ບໍລິການເຄື່ອງຈັກຢູ່ຕ່າງປະເທດ.

ຖາມ: ສິ່ງທີ່ດີກວ່າຕ້ອງການຈາກຂ້ອຍເພື່ອອ້າງລາຄາ?
a).ວັດຖຸດິບ
b). ຄວາມສາມາດໃນການຜະລິດຕໍ່ batch, ພວກເຮົາສະຫນອງເຄື່ອງ 0.5L ~ 200L ສໍາລັບທ່ານ, ຄວາມອາດສາມາດຂະຫນາດໃຫຍ່ຂອງເຄື່ອງສາມາດປັບແຕ່ງຕາມຄໍາຮ້ອງຂໍຂອງທ່ານ.

Q: ວັດສະດຸໃດທີ່ທ່ານສາມາດປຸງແຕ່ງກັບເຄື່ອງນີ້?
ເຄື່ອງສະກັດ CO2 ຂອງພວກເຮົາຖືກນໍາໃຊ້ຢ່າງກວ້າງຂວາງໃນການສະກັດນ້ໍາມັນ hemp, ນ້ໍາມັນ embryo wheat, ນ້ໍາມັນປາ, ນ້ໍາມັນຫອມລະເຫີຍຂອງຢາສູບ, Arteannuin, ນ້ໍາມັນ Sundrops, Gingerol, Pepper haematochrome, ສານສະກັດຈາກ hops, ນ້ໍາມັນຫມາກພ້າວ, ແລະອື່ນໆ.

Q: ວັດສະດຸເຄື່ອງຈັກທີ່ທ່ານໃຊ້ແມ່ນຫຍັງ?
Stainless steel

Q: ຄວາມກົດດັນສູງສຸດຂອງເຄື່ອງຂອງທ່ານສາມາດທົນທຸກແມ່ນຫຍັງ?
50Mpa.ການອອກແບບມາດຕະຖານຂອງພວກເຮົາແມ່ນ 40Mpa.

ຖາມ: ສາມາດໃຊ້ CO2 ຄືນໃໝ່ໄດ້ບໍ?
ແມ່ນແລ້ວ. CO2 ສາມາດຖືກນໍາໃຊ້ໃນການໄຫຼວຽນ.

Q: ເຄື່ອງຂອງທ່ານສາມາດເຮັດວຽກພາຍໃຕ້ເງື່ອນໄຂຂອງ supercritical ແລະ subcritical?
ບໍ່, ມັນພຽງແຕ່ສາມາດເຮັດວຽກຢູ່ໃນລັດ supercritical.

Q: ພວກເຮົາສາມາດເຮັດການທົດສອບການສະກັດກ່ອນທີ່ຈະຊື້ບໍ?
ແນ່ນອນ, ພວກເຮົາສາມາດເຮັດການທົດສອບການສະກັດດ້ວຍວັດຖຸດິບຂອງທ່ານແລະສົ່ງວິດີໂອແລະຮູບພາບໃຫ້ທ່ານ
ສໍາລັບການກະສານອ້າງອີງຂອງທ່ານ.

ຖາມ: ທ່ານມີເຄື່ອງຢູ່ໃນຫຼັກຊັບບໍ?
ບໍ່, ທຸກໆເຄື່ອງໄດ້ຖືກປັບແຕ່ງຕາມຄໍາສັ່ງຂອງທ່ານ.

Q: ມັນໃຊ້ເວລາດົນປານໃດໃນການຜະລິດເຄື່ອງຈັກເມື່ອຂ້ອຍສັ່ງຊື້?
ການໄຫຼວຽນຂອງເຄື່ອງຈັກສານສະກັດຈາກ Supercritical CO2 ແມ່ນສະລັບສັບຊ້ອນ. ໂດຍທົ່ວໄປແລ້ວມັນໃຊ້ເວລາປະມານ 60 ມື້ເພື່ອຜະລິດ. ພວກເຮົາຮັບຜິດຊອບຕໍ່ຄຸນນະພາບຂອງເຄື່ອງທີ່ລູກຄ້າຂອງພວກເຮົາ. ທຸກໆຂັ້ນຕອນແລະລາຍລະອຽດຕ້ອງໄດ້ຮັບການກວດກາຢ່າງເຂັ້ມງວດ.

Q: ຄໍາສັ່ງຂອງຂ້ອຍຈະຖືກບັນຈຸແນວໃດ, ເຈົ້າສາມາດໃຫ້ບໍລິການຕິດຕັ້ງໄດ້ບໍ?
ກໍລະນີໄມ້ອັດ. ແລະພວກເຮົາຈະປະກອບແລະທົດສອບເຄື່ອງກ່ອນທີ່ຈະຫຸ້ມຫໍ່.

ນາງ Joyce:

--- ຜູ້​ຈັດ​ການ​ການ​ຂາຍ​ເປັນ​ມື​ອາ​ຊີບ​ຂອງ​ທ່ານ​

ໂທ​ຫ້ອງ​ການ​:+ 86-18917686969

ອີ​ເມວ​:info@better-industry.com